

Prima CFSAE 50
A straight SAE 50 diesel oil for engines that run hot and work hard: trucks, buses, tractors, construction plant and generators.
A 20W-50 multigrade for high-speed diesel engines on long-haul, urban and off-road duty, from cold start to full load.

MONZA Prima CH-4 SAE 20W-50 is a multigrade heavy-duty diesel engine oil for high-speed four-stroke engines. The 20W-50 grade flows at start-up and keeps its viscosity at full operating temperature, and its additive system controls soot, sludge and piston deposits while protecting against wear in engines that work long hours under load.
| SAE viscosity gradeSAE J300 | 20W-50 |
|---|---|
| Kinematic viscosity at 40 °CASTM D445 | 179.3 mm²/s |
| Kinematic viscosity at 100 °CASTM D445 | 19.79 mm²/s |
| Viscosity indexASTM D2270 | 127 |
| Flash point (COC)ASTM D92 | 240 °C |
| Pour pointASTM D97 | −21 °C |
| Total base number (TBN)ASTM D2896 | 11 mg KOH/g |
| Foam, sequences I · II · IIIASTM D892 | 0/0 · 0/0 · 0/0 ml |
Typical values from production testing. They represent current production and are not a specification.
Always follow the vehicle or equipment manufacturer's recommendations for oil grade and drain interval.
For distributors, shops, workshops and fleets. Tell us the pack sizes and quantities you need.


A straight SAE 50 diesel oil for engines that run hot and work hard: trucks, buses, tractors, construction plant and generators.


Our highest diesel performance level: a 15W-40 for modern high-speed engines, including EGR-equipped engines.

A dependable 20W-50 for older passenger cars, pickups and carburettor engines in hot climates.
Pack images are renderings. Final label artwork may differ.